[MrC11111]

Hello

I have tried to create one's with a wax material base from the library, but I'm really not a master ...
The very subtile transparency/reflection/sparkling is so difficult to achieve!
Some example of my goal (and the wax base, but nothing worked from it...)
Ps : I'm on V2

[MrC11111]

No answer... I think that it is too simple for you.
I have the V2, and the material editor is not so easy for a guy like me, I saw that in the V3 Maxwell has made a new way to build materials, more intuitive and friendly, like me

[Hervé]

yes you should upgrade to V3.. better

[seghier]

if you search you find marble material
i used one called : Taj-Mahal and it give nice result
test

[bograt]

I made a pretty good alabaster one a while ago. Ill try to dig it out for you.

[bograt]

By the way, the wizard milk is not a bad starting point. Try to find one good image reference to work from though, as the transmittance color will vary for different pieces of marble, and from photo to photo.

[MrC11111]

Thank you Seghier, I just download the "Taj-Mahal" mxm, I will test it tomorrow!
Bograt thank you too, your idea to use sss milk like a base seems to be the trick to do, I will test it!

[Half Life]

As per: http://refractiveindex.info/?shelf=main ... ge=Ghosh-o

You will want to set the Nd to 1.6585 -- if you want to enable dispersion set the Abbe number to 49.91.

[bograt]

As per: http://refractiveindex.info/?shelf=main ... ge=Ghosh-o

You will want to set the Nd to 1.6585 -- if you want to enable dispersion set the Abbe number to 49.91.

For marble? Your a nutter! render times will go through the roof! I also think an IOR of 1.66 might be a bit high... especially if using force Fresnel. Ive had good results at around 1.42