[pBarrelas]

Ok guys, here is my photo that i'll try to match.
I took this photo from the portuguese magazine "Arquitectura&Construção", issue nr 31 (April2001), page 91. This a house projected by arq. Mário Louro. (is this info enaugh?)

Let's see how i'll handle this one and if i'll have time o finish.

[sandykoufax]

Yes, very nice photo.

good luck, pBarrelas.

[pBarrelas]

Thanks Sandy, good luck for you too!!

[pBarrelas]

Here is my first WIP image, just starting the modeling!!

[Tim Ellis]

Nice choice of photo.

Looking forward to seeing more.

Good luck in the contest.

Tim.

[pBarrelas]

Hey Tim, thaks a lot and good luck for you too!!
Here you have one more update...

[oz42]

don't forget to do a render with that HUGE light ON when you've finished modelling!

Good luck.

[pBarrelas]

Eh eh...yeah good idea for the multilight animation. Let's see if i get ome time to do that. Thanks mate!!

[sandykoufax]

Very nice start.

I'm curious how coud you express the reflected caustics at the top-right corners.

[Tim Ellis]

I'm curious how coud you express the reflected caustics at the top-right corners.

They may take a long time to clear of noise too.

Nice progress mate.

Tim.

[pBarrelas]

Yeah i bet it will!

Here's just a render test in order to match the camera and sun angle!!

[Tim Ellis]

That's a pretty good match mate.

I did a quick PS overlay of the two & the render windows are only just inside the photo windows and the cabinet on the right has a slightly different perspective towards the far end.

Superb job.

Tim.

[pBarrelas]

Hey Tim very cool idea! I didn't remenber to use PS to try to match the two images! It's very hard to match exactly the two images because of the diferent camera setings. I'll try to correct it a litle more!!
Thanks mate!!

[Pietro Spampatti]

I took this photo from the portuguese magazine "Arquitectura&Construção", issue nr 31 (April2001), page 91. This a house projected by arq. Mário Louro. (is this info enaugh?).

yes it's enough
welcome in pBarrelas

P.

[pBarrelas]

Thanks Pietro!!
Here is one test render where i rendered all the glass panels with the AGS_Dieletric_Basic material at its default settings. The light is comming in right but the reflections have to be worked.



Here i made just tiny adjustment to the transmitamce color in order to tint a litle the glass from the interior panels. It seems that after this change the light can't pass through it and is not illuminating the area marked. I have to give a look into this issue - any ideas?