All posts related to V2
By Gary
#365214
Hello,

Banging my head against the wall trying to create a good mxm for this material. it is 6mm glass with wavy faces to obscure transparency and has a wire mesh in the middle of it. Wire mesh is on a 25mm grid. Any help is appreciated!

Thanks,

Gary
You do not have the required permissions to view the files attached to this post.
By JDHill
#365215
Here's what I would try first: the glass would be pretty standard (it looks quite green), with some (very subtly) mapped roughness, a higher-frequency wavy bump map in the BSDF, and a lower-frequency wavy normal map in Global Bump. I don't have any maps for this, and so would need to make them. I would model the wire (maybe just using a clip-mapped plane) and make a separate material for that.
User avatar
By simmsimaging
#365218
I would just add: you may want/need to separate the UV's for the front and back of the glass and only add the bump to the *back*. Often glass has that bumpy quality in the refractions but the outer surface is quite smooth so this works well. I use that approach a lot on things like bottles.

A good place to start for your base bump map is the one from Jomaga's awesome material on in the repository:

http://resources.maxwellrender.com/sear ... arch=glass bottle&v1=0&v2=0&tipo=

/b

I think that most features that are needed on a re[…]

Maxwell keeps returning an error when I try to ren[…]

Hello good day! I wanted to know if you can help[…]

I chose a new default folder location for the Maxw[…]