- Tue Nov 19, 2013 6:16 pm
#373454
I had this problem before, and placed it on this forum a while ago ( http://www.maxwellrender.com/forum/view ... 97&t=40301 ) and then Mihai suggested to lower the count in the bump map image window, and lower the contrast. that worked.
for this job, I respected all the above suggestions, but still I get this triangulated result.
the object is a ribbon of about 2 meters long and about 3 cm wide, and solid (rectangle with path sweep). I made a very long bump map image so that I did not need many repeats. I also hit the recalc button, changed the smooth factor in both directions, flipped the normals, no luck. I tried normal mapping, but with similar result.
what else can i do to avoid this effect?
Uploaded with ImageShack.us
for this job, I respected all the above suggestions, but still I get this triangulated result.
the object is a ribbon of about 2 meters long and about 3 cm wide, and solid (rectangle with path sweep). I made a very long bump map image so that I did not need many repeats. I also hit the recalc button, changed the smooth factor in both directions, flipped the normals, no luck. I tried normal mapping, but with similar result.
what else can i do to avoid this effect?
Uploaded with ImageShack.us