Help with the plate and background

Topic locked

Help with the plate and background#367482

By Garquitectos - Wed May 01, 2013 2:13 pm

- Wed May 01, 2013 2:13 pm #367482

Hi, this is my first post, so Hello to everybody!!! This is one of my first render with Maxwell and there are a lot of things that I had to learn yet...

Uploaded with ImageShack.us
I have made a scene in Archicad with a panelling object that I programmed some time ago, but when I put the plate, it doesnt match in the point that I mark in the pics...
What have I done wrong?
Thanks in advance.

Re: Help with the plate and background#367513

By seghier - Thu May 02, 2013 4:51 am

- Thu May 02, 2013 4:51 am #367513

i don't understand ; where is the problem ?

Re: Help with the plate and background#367514

By seghier - Thu May 02, 2013 4:56 am

- Thu May 02, 2013 4:56 am #367514

the glass reflect the environement so it must be reflect a far area and we see small tiles + the refraction of glass can minimize or maximize objects

Re: Help with the plate and background#367526

By 42lux - Thu May 02, 2013 4:26 pm

- Thu May 02, 2013 4:26 pm #367526

How is your scene setup? It seems you are only reflecting the HDRI Image and not the Ground from the Backplate?

Re: Help with the plate and background#367553

By Garquitectos - Fri May 03, 2013 3:35 pm

- Fri May 03, 2013 3:35 pm #367553

42lux wrote:How is your scene setup? It seems you are only reflecting the HDRI Image and not the Ground from the Backplate?

In this pass the hdri reflect the enviroment and the ground. I add the backplate at last only...
Don't worry... I'm learning and there are a lot of things that I don't control yet. I come from Artlantis and the gap is very big!!!